BLAST PROTECTIVE BOOTS
Special all leather boots with protection against antipersonnel contact mines with protection against a mass of HE (high explosion)
High Explosive resistence:
Model 1- 30 grams for DCG-AM-L
Model 2- 35 grams for DCG-AM-35
Model 3- 50 grams for DCG-AM-50
The boots have been developed in co-operation with a leading expert in ballistic protection.
The boots can be provided with Drilex / Windtex lining also which ensures 100% waterproofness while keeping wearing comfort and permeability for water vapours out from the boot.
The boots are characterised by a robust and resistant design with long-term service life and do not contain any metallic parts.
This achieved with the total weight DCG-AM-L/ DCG-AM-35 max 3,000 grams, DCG-AM-50 3,200 grams.
The boots are protected by patent.
TECHNICAL SPECIFICATION
1ST LEVEL – INTELLIGENT, MULTI-LAYER ARMORED SOLE
The sole contains special multi-layer intelligent construction.
When overpressure (energy of explosion) arrives to the sole:
-
Part of the energy is reflected back from armour
-
Part of energy is consumed by programmed destruction of high tenacity layers
-
Only small part of energy go through our multi-layer armour and reach the inner armour
-
Maximum pressure coming thru multi layer sole is typically less than 1% of blast energy (testing charge 30 gms for DCG-AM-L, 35 gms for DCG-AM-35 and 50 gms for DCG-AM-50 of TNT is used)
2ND LEVEL – INNER ARMOURED TENSION INTELLIGENT INSOLE
Special construction of tension sole system: Inside the boots you will find a special multi-layer sole which, thanks to several armoured layers, minimises the effect of overpressure to human body
3RD LEVEL – ANTI-PERFORATION PROTECTION
Special construction of intelligent sole ensures: Protection against fragment perforation 2,5 times more than requirements of EU standards for protective boots, while preserving sufficient flexibility

TECHNICAL SPECIFICATION OF BLAST PROTECTIVE BOOTS:
-
AM boot upper is made of smooth, hydrophobic grain
-
AM has a closed tongue and bandaged collar of PDM thickness 5-8 mm) and smooth, hydrophobic grain) leather, (thickness of 1.0-1.3 mm)
-
AM has lining on the vamp, back side and tongue made of DRILEX, special non-woven PA textile, 100% PA brand name DRILEX
-
AM has plastic or leather counter
-
AM has thermoplastic toe puff
-
AM has lacing - 4 eyelets + 4 passes through
-
Boot height size 42/8: AM.L - 27 cm, AM.35 - 28 cm, AM.50 - 29.5 cm
-
Ballistic sole: DCG-AM-L - 8 cm, DCG-AM-35 - 9 cm, DCG-AM-50 - 10,5 cm from ground
-
Weight per size EU46/UK11: maximum DCG-AM-L/DCG-AM-35 - 3.000 g, DCG-AM-50 - 3.200 g
-
Sizes assortment EU/UK: 39/6, 40/6.5, 41/7, 42/8, 43/9, 44/9.5, 45/10, 46/11, 47/12 Colour: Black